ADM Masonry LLC provides chimney repair and installation services for residential properties across New Jersey. From tuckpointing and crown repair to full chimney rebuilds, our licensed masonry crew restores chimney integrity and ensures safe operation for your home.
A chimney is one of the most exposure-intensive masonry elements on a residential property. Projecting above the roofline, it is subjected to direct weather from all directions — rain, ice, snow, and UV radiation — while managing high-temperature combustion gases. Chimneys that are not properly maintained deteriorate faster than any other masonry element due to New Jersey's aggressive freeze-thaw cycles.
ADM Masonry LLC provides chimney repair and installation services for residential properties throughout New Jersey. Our masonry crew performs tuckpointing, crown repair, flashing repair, and full chimney rebuilds above the roofline. Every project begins with a visual inspection to identify all areas of distress, ensuring early detection of cracks that could lead to expensive structural damage.
Tuckpointing — the removal and replacement of deteriorated mortar joints — is a critical maintenance step. Chimney mortar deteriorates faster than brick due to thermal cycling from flue gases. We remove mortar to a depth of 3/4", cleaning the cavity before packing new mortar formulated to match the original joint color, hardness, and profile.
The chimney crown serves as the first line of defense. Crowns in New Jersey often crack within 15 years if they were poured too thin. ADM Masonry LLC replaces failed crowns with a minimum 2-inch thick reinforced concrete crown, sloped to shed water and finished with a waterproof crown coat sealer to prevent water infiltration during the winter.
For historic New Jersey homes with older soft brick, we use specialized lime-based mortar formulations. This ensures compatibility and prevents modern, harder mortars from trapping moisture, which would otherwise cause spalling and irreversible damage to the surrounding original masonry units.
Full chimney rebuilds are required when deterioration progresses to the point where multiple brick courses have lost structural integrity. ADM Masonry LLC tears down the damaged section to the first sound course below the roofline, installs temporary flue protection, and rebuilds the stack to its original height and configuration.
New installations must comply with NFPA 211 — the national standard for chimneys and solid fuel appliances — as adopted by the New Jersey Uniform Construction Code. We ensure the chimney height meets the 3-2-10 rule for optimal draft performance and that the flue is correctly sized for the appliance’s BTU output and fuel type.
We also specialize in chimney flashing — the interface between masonry and roofing. We install step flashing and counter flashing embedded in the mortar joints using corrosion-resistant metal. This seals the junction against New Jersey’s 46-inch annual average precipitation, preventing leaks into attics and interior ceilings.
A deteriorated chimney creates structural and safety risks. Cracked flue tiles or compromised mortar joints can allow carbon monoxide to escape into the home or creosote accumulation to cause house fires. Regular inspection and timely repointing extend the life of a chimney by decades and cost a fraction of a full reconstruction.
Working with a licensed chimney contractor in New Jersey ensures that every repair meets building code safety requirements. ADM Masonry LLC provides detailed written estimates, allowing property owners to address joint failure before it progresses to structural compromise.
ADM Masonry LLC is based in Newark, NJ and serves residential and commercial clients throughout Essex, Hudson, Union, Bergen, and Passaic counties. Our licensed crew is available for projects large and small across the state.
Request a free estimate for your New Jersey project. Our licensed crew provides clear written quotes with no obligation.
